BrassCraft ProCoat CSSC21-72 Straight Gas Connector, 3/4 in Inlet, 3/4 in
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Brass Craft PSC1094L Gas Leak Detector, 2oz
Gas leak detectors liquid size 2 ounces Used for natural, LP gas, mixed, manufactured, and LP gas-air mixtures.
BrassCraft ProCoat CSSD54-36P Straight Gas Connector, 1/2 in Inlet, 1/2 in
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
3/8 By 3/8 Inch Forged Brass Gas Valve
3/8" x 3/8", forged brass gas ball valve, flare x flare, 1 piece body, csa 3-88 certified, csa certified, chrome plated forged brass ball.
1/2 By 1/2 Inch Forged Brass Gas Ball Valve
1/2" x 1/2", forged brass gas ball valve, flare x flare, 1 piece body, csa 3-88 certified, csa certified, chrome plated forged brass ball.
9/16 Inch By 24 Amp Gauge Gas Heater Valve
Key Features
Quarter-turn lever handle for positive On/Off operation
Coated aluminum handle for corrosion and solvent resistance
Multi-directional flow
One-piece body for leak resistance and long valve life
Gas ball valves for heaters - flare x fip quarter turn lever flare x fip ins.=9/16 x 1/2
Forged brass 1-piece body. Chrome-plated forged brass ball. Coated aluminum handle. 9/16-24 fine thread flare for 3/8 in tube.
BrassCraft 3/4" FIP Angle Gas Ball Valve, NULL, 3/4
Brass craft gas ball valve, series: SC, angle, 5/8 in, flare x fip end connection, lp/propane, lp gas-air mixtures, forged brass body, 32 - 125 deg F, 6.9 in length x 4.9 in width x 1.9 in height, standards: CSA certified, for indoor and outdoor use.